I have a 2002 Dodge Neon Base (420a SOHC) with a hahns Race Craft turbo kit on it (recently installed). Months after installing the kit my car had issues starting, while changing the plugs I discovered oil in the spark plug wells. Has n e 1 installed a hahns kit or had a similar issue with a turbo neon? ***Additional Note "I discovered oil in my intake manifold as well"

 

The spark plug tubes are coming out, and/or the seals are bad under the valve cover.

 

ive only ever had this problem(with both turbo & non turbo neons) when my valve cover gasket was blown. had it happen in my srt4 and my 99 SOHC.

 

do you have a oil catch can in between the intake and the pcv valve?

 

Good call. Missed the intake manifold part. On a boosted Neon, you'll need one of these for sure.

 

I need to do the catch can. Does anyone have pics of what it should look like when done?

 

PCV Valve ==== |Catch Can| ==== Intake

Make sure to get chemical resistant (gas) tubing.

 

Where would be a good place to get the catch can?

 

ebay or turbo neon store online. THats where I got mine when I had my 1st gen turboed with a hahn stage 2 kit .

 

Found one on ebay thanks.