2003 Dodge neon wont start sometimes
#11
#14
#15
Yea well my codes were the knock sensor (which ive changed), and the camshaft sensor. the mechanic had said maybe it was the starter because it was stuck, so it was changed out and it still didnt want to start so then we changed the knock sensor and the car is still not starting. ill have the wiring checked out as well
UPDATE:
We found out that it might be the switch because theres is no current going from the switch to the fuse to start it. So we are gonna check into that. Thanks for the clarification!
UPDATE:
We found out that it might be the switch because theres is no current going from the switch to the fuse to start it. So we are gonna check into that. Thanks for the clarification!
Last edited by Az04Neon; 08-28-2011 at 07:06 PM.
#17
Yes, a "small" EVAP leak I believe. It could be a gas cap as everyone seems to think, but the Neon also gets the code commonly from the lines coming off of the carbon canister. The C/C is located in front of the RR wheel; it's a black canister. The biggest line coming off of it will develop cracks on the ends over time. Spend some time and remove the line carefully so you don't break any of the plastic crap the line is attached to (you'll have to replace the whole line!). I used cold tape and RTV to fill in and then cover and seal the cracks. Fixed the problem for me.
#18
Im gonna go ahead and try that, sadly I wont be able to look/work on it until this weekend since my jackstand is at my parents house. But ill look into it. do you have any video or write up on how to remove the line and CC? Or is it self explanatory? btw could it also be some of the hoses in the hood?
#19
#20