how much horse
#1
how much horse
ok i have a 2004 dodge neon SXT 2.0L with:
custom intake which i talked about here https://dodgeforum.com/m_370044/tm.htm
a R/T style muffler from moper
prothane motor mounts (no horse but i wanted 2 llist it anyway )
and i will b getting 2.25 in pipes from the cat to the muffler
how much horse do u guys think i have from that (prob not much)
custom intake which i talked about here https://dodgeforum.com/m_370044/tm.htm
a R/T style muffler from moper
prothane motor mounts (no horse but i wanted 2 llist it anyway )
and i will b getting 2.25 in pipes from the cat to the muffler
how much horse do u guys think i have from that (prob not much)
#2
#7
RE: how much horse
I was under the impression that all neons from 2001 and up had 2.25" piping, no matter what trim level it was, but i've been known to be wrong before. lol.
But what I've come to learn is 2.25" is the "optimal" size for a N/A lightly modded Neon, 2 1/2" is pushing it, and well, past that your just doing more harm than good with N/A.
But what I've come to learn is 2.25" is the "optimal" size for a N/A lightly modded Neon, 2 1/2" is pushing it, and well, past that your just doing more harm than good with N/A.
Trending Topics
#8
RE: how much horse
The ACR's and RT's already have 2.25 exhaust system. The factory reduced exhaust pipe diameter from 2.25 inches on 95-99 cars to 2.0 inches on 2000-up basic Neon models. This change was made in an effort to make the current Neon appear more mature than the previous generation (it made it quieter).
A 2.5 inch exhaust system is better if you're really serious about power.
My info is from a Performance guide from Anthony Thomas.
A 2.5 inch exhaust system is better if you're really serious about power.
My info is from a Performance guide from Anthony Thomas.
#9
RE: how much horse
I have a Base 02 Neon and I too was under the impression that it came with 2" pipe, but when I had my exhaust done a couple of weeks ago they cut out 2 1/4 inch so I decided to open it up to 2.5". Either their is some mis-information out there or Dodge did not go to 2" pipe as a standard. I am also confused if 2.5" is too much for a slightly moded Neon then why are all the bolt on kits sold in 2.5 format