Any one know of this doing anything bad to a 03 se or anyother car for that matter???
i am thinking abot getting one cause i have the obx test pipe and with no cat, and it set of the CEL (p0420)

just trying to get opinions!!!

https://www.casperselectronics.com/M...Category_Code=


thanks

 

You already did the bad thing by removing your pollution equipment, that should just turn off you CEL if built right.

 

Besides the pollution aspect what is bad about removing the cat??

 

ok not sure if that works but there is much cheaper way too turn of that code all you need is 2 18mm sparkplug defoulers and a drill

ok here is how you do it
1. remove lower o2 the screw in one defouler were it was
2. Drill out the second one so that the o/2 can screw into it then just screw the whole thing into the other none fouler
I have been running with this for almost a year and no code it will cost you about $3-6

 

Sounds great but what is a defouler and wear can i get them???

got any pic's??

the sensor thing work by sending the same electro signal to the computer as the 02 would send.

 

yeah I know but alot of pll say they dont work for the neon but one of my buddies has one for a honda also from the same company casper sim and it worked for him
defouler can bebought at any parts store I bought mine from Autozone they already come two in a packet just ask at the counter

 

so you are saying that the 02 sensor go's inside the defouler which is screwed into the downpipe were the o0 sensor was???

im kind of confused!!! [][][&:][&:]a pic would be awsome!!!!!!!!!!!!!!!!!!!!!

 

I pm ed you got a pic but it is way too big. I don't have any program too make it smaller

 

can u pm it to me too because im going to have the same problem if modernperformance.com ever sends me mine

 

hERE FOR EVERYONE THAT NEED THIS HERE IS THE WRITE UP, WIT PICTURES ON HOW TO DO IT!!

http://forum.2gn.org/viewtopic.php?t=1025

iT TOOK ME MABY 5 MIN INCLUDING DRILLING TIME AND IT HAS SHUT OFF THE CODE FOR NOW!!!