Started my interior LED work, the cluster, HVAC, defrost switch, and some in the little cubby. What do yall think?

[IMG]local://upfiles/23425/1327AE41D9B34C919514AAE1731D1A3B.jpg[/IMG]

[IMG]local://upfiles/23425/D2B2104292634F48B677915BAE1F903F.jpg[/IMG]

 

thats just LED? Looks pretty good man, are there any bright/dull spots?

 

looks good did you get the hvac from gmr?

 

I love that, i'd like to do that I love blue gauges.

 

What type bulb and how many did it take for the cluster and the HVAC?

 

Thats nice.

You just swapped out the stock with the blues?.
(Ya can get 12v HO LEDs at radioshack)
Im planning the same kinda thing, but with purple, or aqua maybe.
It will eventualy match the external lighting... when I settle on a color
(Not white, cause the cars white, Not blue, red, green or yellow for obviouse reasons)

 

I used blue inverted cone #194 LEDs from ebay for the cluster, they just swap with the stock bulbs on 00-04. You can only do blue or white because of the green film Dodge puts on them, there is a way to do any color, but it's far more work. The HVAC is stock, but I re-wired the bulbs with 5mm blue LEDs and resistors, again ebay. same with the defrost switch. And the cubby I just put two clusters of 3 LEDs and wired them to the defrost switch so they work with the lights/dimmer. I highly recomend using heat shrink tubing for any wiring work, it was my first time using it and it had better results than tape and connectors. There is a better how to on annother forum, I believe it's an affitiliate of this one, for the SRTs.
srtforum.com

I plan on doing blue under the seats and dash and door pockets as well, but no time right now. Thanks for the compliments, I was very happy with the results.

 

those are sick!!!!!!!!!!!!!!!! looks better then stock