What Did You Do To Your 2ND GEN RAM Today?

Subscribe
Mar 8, 2013 | 12:14 PM
  #10381  
I shoved about $130 down the filler neck...

though this time I figured out my ACTUAL fuel economy..

used my GPS odometer for mileage this time since my speedometer is off due to oversized tires...

so I calculated with both mileage numbers and results are: 14.2mpg via truck odometer, 15.3mpg via GPS odometer.

not too shabby
Reply 0
Mar 8, 2013 | 04:07 PM
  #10382  
^lol
I put $28 down the filler neck.


Also drove the 76, blew past some cars doing 60 at full throttle.
Reply 0
Mar 8, 2013 | 05:30 PM
  #10383  
Quote: Took $60 out of my wallet and stuffed it down the filler neck.
Quote: I shoved about $130 down the filler neck...

though this time I figured out my ACTUAL fuel economy..

used my GPS odometer for mileage this time since my speedometer is off due to oversized tires...

so I calculated with both mileage numbers and results are: 14.2mpg via truck odometer, 15.3mpg via GPS odometer.

not too shabby
Quote: ^lol
I put $28 down the filler neck.


Also drove the 76, blew past some cars doing 60 at full throttle.

I just wanted to use that!
Reply 0
Mar 8, 2013 | 06:10 PM
  #10384  
Quote: http://youtu.be/gutCFMc5khY

I just wanted to use that!
Reply 0
Mar 8, 2013 | 06:16 PM
  #10385  
Quote: http://youtu.be/gutCFMc5khY

I just wanted to use that!


Reply 0
Mar 8, 2013 | 11:20 PM
  #10386  
Limped it home after the idler pulley broke and shredded the serp belt. Just one thing after another!
Reply 0
Mar 9, 2013 | 04:19 PM
  #10387  
Washed it, gave it a oil change. I have switched over to Liqui Moly 5w40 for oil just to see what it's like. Put a hun in for gas, and bought some body work supplies ouch that stuff has gotten expensive.

Name:  2013-03-09_13-06-01_826_zps4eb48761.jpg
Views: 30
Size:  48.7 KB


Reply 0
Mar 9, 2013 | 07:11 PM
  #10388  
i put $50 of gas in the 81 and $20 in the 93 and gave them both a bath.. also hopefully fixed the exhaust leak on my 93 until summer gets here. the muffler is now touching the frame but the tail pipe is no longer being hit by the shock. whoever installed the muffler and tail pipe screwed up. tail pipe need to be turned a bit more and the muffler also need to be rotated. everywhere i didn't weld the first time was leaking.
Reply 0
Mar 9, 2013 | 11:58 PM
  #10389  
Got the new idler pulley and serp belt installed. Decided id be and nice and take it to its favorite place, the local gas station!
Reply 0
Mar 10, 2013 | 07:08 PM
  #10390  
Took the new to me boat out for its maiden voyage. Truck could barely tell it had anything behind it, 4.10 gears help with that and so do the upgraded brakes. Boat ran good and even caught a couple small grouper.

Name:  35796C7D-7A01-4FB9-AEC2-5E8F676E69C2-6905-00000721BEF739AF.jpg
Views: 43
Size:  271.8 KB


Reply 0