2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

What Did You Do To Your 2ND GEN RAM Today?

Old Aug 28, 2013 | 04:13 PM
  #12421  
ZipZap's Avatar
ZipZap
Rookie
Joined: Mar 2013
Posts: 55
Likes: 0
From: Germany
Default

Painted the inside of my Raider Nomad campertop in black
 
Reply
Old Aug 28, 2013 | 05:16 PM
  #12422  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,212
Likes: 367
From: Winston Salem, NC
Default

Originally Posted by crazzywolfie
i took the exhaust off my 81 today. the exhaust was rusted out in 2 spots about 1" apart. planning on welding it all back together.
Impressive you can weld that back together.....
 
Reply
Old Aug 28, 2013 | 05:46 PM
  #12423  
DeeJayh's Avatar
DeeJayh
Rookie
Joined: Aug 2013
Posts: 89
Likes: 0
Default

Originally Posted by crazzywolfie
i took the exhaust off my 81 today. the exhaust was rusted out in 2 spots about 1" apart. planning on welding it all back together.
I'd love to see a picture when it's done.
 
Reply
Old Aug 28, 2013 | 06:09 PM
  #12424  
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

Drove out to the country to do some trimming for my grandparents. Ram did good. No noticeable slips or mishaps. I'm nowhere near as heavy into the gas as I have been. MPG's should be up.
 
Reply
Old Aug 28, 2013 | 06:15 PM
  #12425  
crazzywolfie's Avatar
crazzywolfie
Legend
15 Year Member
Liked
Joined: Jun 2009
Posts: 8,025
Likes: 72
From: orangeville ontario
Default

Originally Posted by jkeaton
Impressive you can weld that back together.....
well after i sandblast things i will no problem welding things back together but this time i thing i am going to paint things.
Originally Posted by DeeJayh
I'd love to see a picture when it's done.
i will make sure to post them. it will look a lot better after everything has been sandblasted, welded and painted. will almost be too nice to re-install.
 
Reply
Old Aug 28, 2013 | 06:29 PM
  #12426  
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

^You need a glasspack.


I forgot, I also put a bottle of Star Tron in the tank.
 
Reply
Old Aug 28, 2013 | 06:34 PM
  #12427  
Spillage's Avatar
Spillage
Record Breaker
10 Year Member
Liked
Loved
Community Favorite
Joined: Sep 2012
Posts: 2,439
Likes: 73
From: S. Florida
Default

The Y-pipe for my Pacesetter LT headers turned up today... compared to stock, it looks like sewerage pipe... well, it is 3"Ø, so I guess it is.
I was surprised how thick the wall is... they should last a good while, especially in a no salt zone like south FL.
Next on the list is a new Cat.
 
Reply
Old Aug 28, 2013 | 08:49 PM
  #12428  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Towed a trailer with a DitchWitch on it.

Got a little interesting when I loaded it back on the trailer when I was done, parked the truck on the side of the road, didn't think much of the downhill slope and the gravel....

Got the DitchWitch back on the trailer and than I felt the trailer sliding, turned at the looked at the truck and it was sliding down the hill (with the parking brake set) nothing I could do but hold onto the machine and hope for the best.

The truck of course jackknifed into a perfect "L" with the trailer, but it came to a stop with about 2" between the side of the bed and the trailer.... Got lucky...

Didn't grab picks of it like that... But have a few useless picks.

Name:  20130828_185741_zps556d9f87.jpg
Views: 56
Size:  249.4 KB

Name:  20130828_185738_zpse0a510d9.jpg
Views: 99
Size:  193.1 KB

Name:  5b2b5e6a-074f-4638-b3d1-41102a53d465_zps6cc3dddf.jpg
Views: 90
Size:  172.6 KB
The black marks are were the rear tires slide on the gravel. It probably slide 15' or so....
 
Reply
Old Aug 29, 2013 | 08:01 AM
  #12429  
DeeJayh's Avatar
DeeJayh
Rookie
Joined: Aug 2013
Posts: 89
Likes: 0
Default

Originally Posted by stewie01
Towed a trailer with a DitchWitch on it.

Got a little interesting when I loaded it back on the trailer when I was done, parked the truck on the side of the road, didn't think much of the downhill slope and the gravel....

Got the DitchWitch back on the trailer and than I felt the trailer sliding, turned at the looked at the truck and it was sliding down the hill (with the parking brake set) nothing I could do but hold onto the machine and hope for the best..
That's the crappy thing about the parking brake, it only locks up two wheels... never unload something heavy on a grade trusting the parking brake because as soon as you break traction you only have two wheels trying to get it back. I've seen guys end up with their trucks in the drink that way trying to solo launch boats. The best thing is always to have someone to lay on the pedal brake to lock up all 4... a nice thing about an auto transmission if you have one is putting it in 4L and putting it in park, then you have the trans parked on all four and the e-brake on the back two... I suppose it's all the same to leave it in gear, but gears rotate and parking pins don't. Still always better to have a helper. Glad you came out unscathed man.
 
Reply
Old Aug 29, 2013 | 09:43 AM
  #12430  
QuadCabLuv's Avatar
QuadCabLuv
Record Breaker
Joined: Dec 2008
Posts: 1,585
Likes: 0
Default

drove it to work, nice working close enough to home to drive it again. saw a 03 2500 Cummins at a car lot on the way. I may stop and see about trading mine in for it this afternoon.
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:14 PM.