sold my 98 but still have my 96 plow truck

 

Got my new/used front carrier one step closer to gears. Now I just need the gears rear locker and the shop to install them.

 

last night i put my recon cab lights on

 

replaced the open element breather with a closed element (the open element breather would come loose for some reason, the new one works much better)

also replaced tiny spot mirrors with bigger ones

put about 30 miles on it and realized i'm due for an oil change in a little over 500 miles, do that next week, i'll have 500 on it by then, not kidding

 

tranny got pulled out today. stuffing 1ton guts into it...

 

Took it hunting, and down some pretty fun trails(considering the snow). Damn near broke my hand putting chains on it.

Josh

 

don't know yet. i did it yesterday and i work all weekend. and i drive the camaro to work. plus my plenum plate has a puddle in it and it's had a lack of power here lately so i'll know for sure when i get the plenum fixed.

it isn't hard to do, i just used a sharpie on the socket and extension. only 1 plug lined up properly on the first try, the rest had to be moved around to different cylinders to get them to line up correctly.

 

Going to start tearing my truck apart today. My goal is to get the old Manifold out, Get area clean, Mount all the sensors/fuel injectors-fuel rail to the new manifold.

Just waiting for my hughes plate....

 

hey, i'm waiting for my hughes plate too.

 

Replaced my drivers side wheel bearing, went faster than I thought which was about 30mins.