When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got stopped by the popo in Austin for not using turn signal.....I WAS using turn signal...it just wasn't working! No tail lights either. Fortuneately got back home before dark...gotta lokk at it tomorrow!
Wow man! Sweet *** looking truck now... Very impressive. We need a thread with a bunch of new pics!
Replaced the output speed sensor. Also finally bit the bullet and had a peak down the TB and checked the plenum pan with a magnet. Bad news is the magnet sticks, good news is there is no oil pooled in the intake. There is carbon build up but no oil so either the gasket has not blown yet or if it did blow, someone repaired it but left the original plate in.
After procrastinating about putting in the new 7" lift most of the day on sat, I got started at 4pm finished at 10:30pm. One short trip this am for a coffee and all seams well. Pix later today.
I need to go over everything this am, then wash it. So pix in about 2hrs. It does not look that much different, I think I have the "it needs to be bigger bug".
changed rear diff fluid, by way of cover removal. took lots of step by step pis to post a DIY thread however, i am apparently not privledged to post in the DIY area. Bummer
This is it with the 7" lift. I still have a few hr's of work, working on vac lines and the like. There is no way I will clear 37's with the running boards on the truck so time to figure out what to do, body lift or more suspension lift or just leave it. Crappy cell pix sorry.