2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

The Official 2nd Gen RAM Forum OT thread

Thread Tools
 
Search this Thread
 
  #9661  
Old 06-12-2013 | 06:16 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

^^ You mean that's how you FAIL!

But seriously, I JUST watched that video from a facebook post... Great minds think alike!
 
  #9662  
Old 06-12-2013 | 06:24 PM
crazzywolfie's Avatar
crazzywolfie
Legend
Joined: Jun 2009
Posts: 8,024
Likes: 71
From: orangeville ontario
Default

it cleaned the jeep off didn't it? the water was still in the pool until they cut it open.
 
  #9663  
Old 06-12-2013 | 06:27 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

It seemed the point of driving the Jeep through the pool was to destroy the pool, not clean the Jeep.
 
  #9664  
Old 06-12-2013 | 06:38 PM
crazzywolfie's Avatar
crazzywolfie
Legend
Joined: Jun 2009
Posts: 8,024
Likes: 71
From: orangeville ontario
Default

if he was trying to drive the jeep through the pool he wouldn't have built a ramp.
 
  #9665  
Old 06-12-2013 | 06:44 PM
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

That used to be a rather nice above the ground pool, as they had to take a chop saw to it....
 
  #9666  
Old 06-12-2013 | 07:16 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

Originally Posted by crazzywolfie
if he was trying to drive the jeep through the pool he wouldn't have built a ramp.
Video description:

"This is how we tear down a pool in Southern Ontario !!!!"

To me that reads "we tried to tear down the pool with a Jeep but had to use a chop saw"

 
  #9667  
Old 06-12-2013 | 10:53 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

Worked on the firewood supply some more, I've been eyeing a dead tree down by the creek for a few days, finally decided to cut it down. The wood was so hard I couldn't get a vertical cut to cut a notch out, the chain isn't dull as it handled the horizontal cut with ease, the tree did had a slight lean uphill so I figure what hell, start cutting from the back against the lean.

Tree eventually started to fall I was looking at the tree and looking at the branches watching it's movement and for a second it seemed like it wanted to fall my ways so I get the hell out of the way, tripped over some 2' high weeds and watched the tree fall perfectly where it was supposed to! Scared the **** outta me though...

Red Oak.

I need a damn wood splitter.
 

Last edited by stewie01; 06-12-2013 at 11:04 PM. Reason: Wording
  #9668  
Old 06-12-2013 | 11:01 PM
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

Sounds like fun. I learned that sometimes even when you don't think it's going to fall where it should, it does.

We have one of these:
http://www.northerntool.com/shop/too...6859_200316859
 
  #9669  
Old 06-12-2013 | 11:04 PM
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 2
From: Fredericksburg, Virginia
Default

Anyone else game?

http://trollthensa.com/

Edit:

Dodge dude, that looks pretty nifty, how's it held up for y'all?
 
  #9670  
Old 06-12-2013 | 11:09 PM
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

That has already passed. It was supposed to all happen at 7EST.

Works fine. Haven't used it much. The main problem IMO is the length limit of 18 inches.
 


Quick Reply: The Official 2nd Gen RAM Forum OT thread



All times are GMT -4. The time now is 12:03 PM.