2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Can I fit 37" dick cepek on my truck? PLEASE HELP!

Thread Tools
 
Search this Thread
 
  #1  
Old 12-06-2011 | 11:46 AM
simonsdodge94's Avatar
simonsdodge94
Thread Starter
|
Registered User
Joined: Dec 2011
Posts: 14
Likes: 0
From: B.C, Canada
Default Can I fit 37" dick cepek on my truck? PLEASE HELP!

Hi. I have a 2001 Dodge Ram 1500 Offroad edition. I have a 3" bds suspension lift and a 3" body lift. Can I be able to put my 37" dick cepek tires on? My buddy has a 2000 Dodge Cummins with a 4" block and he can fit his 37" tires on so I was wondering can I?

Please please help me out, thanks!
 
  #2  
Old 12-06-2011 | 11:38 PM
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 23
From: Sioux Falls, SD
Default

Welcome to DF.

One little tip I'll give ya is to please use the search feature at the top of the page. Tire sizes, what fits and what doesn't fit, etc. have been covered many times before.
 
  #3  
Old 12-07-2011 | 12:24 AM
dodgeram07's Avatar
dodgeram07
Champion
Joined: Mar 2008
Posts: 3,363
Likes: 1
From: ohio
Default

35's oh yea

37's it will be close,,,, but i have seen it done
 
  #4  
Old 12-07-2011 | 02:06 AM
biggreen2500's Avatar
biggreen2500
All Star
Joined: May 2011
Posts: 787
Likes: 1
From: bellingham wa
Default

should fit.. but doing any type of off roading they will rub.. and what type of wheels do u plan on using
 
  #5  
Old 12-07-2011 | 03:57 AM
97tn4x4's Avatar
97tn4x4
Record Breaker
Joined: Mar 2009
Posts: 1,814
Likes: 0
From: Memphis, TN
Default

Everybody says as a rule of thumb 5" for 35's then every inch of lift is another inch of tire but personally I've got 7" of suspension on 35's and it's perfect. I would suspect a little rubbing with 37's on a 6" lift. I'm getting 37's in february and I'm gonna go up to 9". I know I could make 37's hit some sheet metal the way my truck sits now.
 
  #6  
Old 12-07-2011 | 03:40 PM
simonsdodge94's Avatar
simonsdodge94
Thread Starter
|
Registered User
Joined: Dec 2011
Posts: 14
Likes: 0
From: B.C, Canada
Default

97tn4x4: I have the 3" suspension and 3" body lift and I'm probably going to buy a 2" coil spacer then a leaf spring for each side of the rear. So I'm sure a 8" lift will clear 37s
 
  #7  
Old 12-07-2011 | 09:47 PM
SgtMoe's Avatar
SgtMoe
Registered User
Joined: Feb 2011
Posts: 22
Likes: 1
From: High Point NC
Default

Originally Posted by simonsdodge94
Hi. I have a 2001 Dodge Ram 1500 Offroad edition. I have a 3" bds suspension lift and a 3" body lift. Can I be able to put my 37" dick cepek tires on? My buddy has a 2000 Dodge Cummins with a 4" block and he can fit his 37" tires on so I was wondering can I?

Please please help me out, thanks!
Here's mine with 37" M-16....
 
  #8  
Old 12-08-2011 | 04:59 AM
biggreen2500's Avatar
biggreen2500
All Star
Joined: May 2011
Posts: 787
Likes: 1
From: bellingham wa
Default

three stabilizers? got pics of that set up
 
  #9  
Old 12-08-2011 | 08:17 AM
(texas-ram)325HP's Avatar
(texas-ram)325HP
Veteran
Joined: Mar 2011
Posts: 263
Likes: 0
From: Texas
Default

Will probably have to trim and with the right rims and backspacing
 
  #10  
Old 12-08-2011 | 10:55 AM
simonsdodge94's Avatar
simonsdodge94
Thread Starter
|
Registered User
Joined: Dec 2011
Posts: 14
Likes: 0
From: B.C, Canada
Default

Originally Posted by SgtMoe
Here's mine with 37" M-16....
So SgtMoe how much trimming did you need to do if you did any?
 


Quick Reply: Can I fit 37" dick cepek on my truck? PLEASE HELP!



All times are GMT -4. The time now is 05:03 AM.