2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Junk Yard trip

Thread Tools
 
Search this Thread
 
  #141  
Old 07-05-2012 | 04:11 PM
zman17's Avatar
zman17
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by redneck_ram
i have access to a small generator, and they have power right on the side of the building where the truck is.

what exactly do i have to do to get it out? just need a heat gun right?
Yea, and there are a few tabs you need bend out of the way.

Originally Posted by Prototype
Hey zman, how much for you to get me a blower motor resistor the next time you go?

Depends on how much they charge me for it. And where I need to ship it.
 
  #142  
Old 07-05-2012 | 04:31 PM
crazzywolfie's Avatar
crazzywolfie
Legend
Joined: Jun 2009
Posts: 8,024
Likes: 71
From: orangeville ontario
Default

Originally Posted by Prototype
Hey zman, how much for you to get me a blower motor resistor the next time you go?
have you checked rock auto? they got them for $35 plus shipping but you can get 5% off if you use a discount code that you can find somewhere on here.
 
  #143  
Old 07-06-2012 | 12:22 AM
Prototype's Avatar
Prototype
Rookie
Joined: Sep 2011
Posts: 76
Likes: 0
From: Jamul CA
Default

Originally Posted by zman17
Depends on how much they charge me for it. And where I need to ship it.
BLEH I swear I put my location in under my profile, but it needs to come to Jamul, CA, 91935

Originally Posted by crazzywolfie
have you checked rock auto? they got them for $35 plus shipping but you can get 5% off if you use a discount code that you can find somewhere on here.
Yeah, I've seen them on ebay too for I think $25-ish, but I figured I would ask how much zman could get me one for
 
  #144  
Old 07-16-2012 | 11:20 PM
Prototype's Avatar
Prototype
Rookie
Joined: Sep 2011
Posts: 76
Likes: 0
From: Jamul CA
Default

So I was able to stop by the local JY when I was out today, they robbed me for $15 for the resistor, but at least I got my blower speeds back
 
  #145  
Old 08-01-2012 | 01:00 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

hey, i found the thread! hahaha

john, could you look for the driver side lower dash(kick panel) for me. think my truck is agate. all i know is its dark gray.

also, a seat bottom. mine is torn, and sagging. thanks!




oh btw.... cat fit up nicely thanks again!
 
  #146  
Old 08-01-2012 | 09:50 PM
RageGuy's Avatar
RageGuy
Professional
Joined: Sep 2011
Posts: 187
Likes: 0
Default

I have the following:

- Nearly complete air cleaner assembly: Intake tube, air filter box, semi-new air filter (I do NOT have the retainer ring)
- IAC
- 2X TPS (One has flat pins, one has rounded pins)

If you want anything PM me.
 
  #147  
Old 08-02-2012 | 08:00 AM
1stGenDak's Avatar
1stGenDak
Professional
Joined: Jan 2011
Posts: 136
Likes: 0
From: Jacksonville, Fl
Default

I need some small electrical parts that i can't seem to find at the local yards. All of the u-pull yards have the same problems because people just rip off the door panels trying to get you the window guts and break all the plastic clips. Here is what I need for my 1996 1500 SLT Laramie Tan Interior...

driver side window/lock switch TRIM piece with clips
driver side window switch with clips
driver side power lock switch with clips
passenger side window/lock switch TRIM piece with clips
passenger side window switch with clips
cruise control switch (the flat bar style that is on the bottom of the steering wheel)
passenger side taillight
driver side liftgate support cable
upper and lower dash panel (doesn't have to be perfect but it can't have huge holes)

If you could keep an eye out for me I would appreciate it.
 
  #148  
Old 08-02-2012 | 04:56 PM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default Evap Canister and Vac Lines

Got this today. Total of $43 out the door.


Name:  photobucket-2633-1343940821345.jpg
Views: 36
Size:  98.0 KB
 
  #149  
Old 08-02-2012 | 05:04 PM
zman17's Avatar
zman17
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by redneck_ram
hey, i found the thread! hahaha

john, could you look for the driver side lower dash(kick panel) for me. think my truck is agate. all i know is its dark gray.

also, a seat bottom. mine is torn, and sagging. thanks!




oh btw.... cat fit up nicely thanks again!
You talking about this? Name:  DSCF0791.jpg
Views: 28
Size:  247.7 KB



How does it sound with the cat?
 
  #150  
Old 08-02-2012 | 05:09 PM
zman17's Avatar
zman17
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by RageGuy
I have the following:

- Nearly complete air cleaner assembly: Intake tube, air filter box, semi-new air filter (I do NOT have the retainer ring)
- IAC
- 2X TPS (One has flat pins, one has rounded pins)

If you want anything PM me.


Don't tread on my thread. LOL Got stuff for sale , put it in the classified section.
 


Quick Reply: Junk Yard trip



All times are GMT -4. The time now is 02:36 AM.