Wheeling a fullsize
#491
are you gong to do a high steer? i cant remember what your axle has (balljoints or kingpins) i am to lazy to look for it lol. that track bar mount is nice. the removable forth link is a great setup the only issue with the 4 link is in extreme articulation is the front d shaft can hit the link if no setup properly. it will be nice to see how it turns out. i built a 73 ford dana 60 with a custom truss and ram mount i also cut the lower part of the pumpkin and mohawked it. i will see if i can find my pics of it
#492
Not right away. For sure will be needed when new axle with front ARB engaged.... lol
That's not right that your Redhead went kaput already. Did you add a larger cooler like I suggested?
How steep is your drag link angle? I don't remember if you have the TRE on the bottom. I'll go check your thread for pics. Perhaps we compare some triangulation! hehe
I guess I should look at the angle, the Pittman arm is the one that came from BDS for a five inch lift. I added the coil spacer that added another 2" lift but did nothing to the Pittman arm. The two tie rods are the stock ones
#493
are you gong to do a high steer? i cant remember what your axle has (balljoints or kingpins) i am to lazy to look for it lol. that track bar mount is nice. the removable forth link is a great setup the only issue with the 4 link is in extreme articulation is the front d shaft can hit the link if no setup properly. it will be nice to see how it turns out. i built a 73 ford dana 60 with a custom truss and ram mount i also cut the lower part of the pumpkin and mohawked it. i will see if i can find my pics of it
#494
So with your removable upper are you gonna still have the four kink for on road?
I dont see how not having any upper control would work at all.
Thanks for the info about the truss. All I knew was "makes it stronger" but no idea in what way and I had no knowdlege of the other benefits either.
As always, I'm excited to see how this turns out
Sorry if I missed it, but what kinda track bar setup you running?
I dont see how not having any upper control would work at all.
Thanks for the info about the truss. All I knew was "makes it stronger" but no idea in what way and I had no knowdlege of the other benefits either.
As always, I'm excited to see how this turns out
Sorry if I missed it, but what kinda track bar setup you running?
Last edited by Ham Bone; 06-10-2014 at 09:29 PM.
#495
#500