2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

loose door,,, sqeaky

Thread Tools
 
Search this Thread
 
Old Nov 23, 2012 | 06:31 PM
  #1  
neiasden's Avatar
neiasden
Thread Starter
|
Amateur
Joined: Oct 2012
Posts: 42
Likes: 0
From: stillwater, ok
Default loose door,,, sqeaky

my driver side door seems to be loose or lost some rubber, when i go on a bumpy road it squeaks, if i hold it tight, it stops, making me think its loose..?? whats the best way to make the door tighter ?? thanks..
 
Reply
Old Nov 23, 2012 | 07:20 PM
  #2  
kejobe's Avatar
kejobe
Record Breaker
Joined: Aug 2010
Posts: 2,241
Likes: 12
From: Ohio
Default

In which way is it loose? If its loose when you close it fully (where you can still push the door closed a little more) adjust the striker in the door jamb.

If its loose by moving up and down when the door is open, the hinge pins need replaced.
 
Reply
Old Nov 30, 2012 | 07:57 AM
  #3  
neiasden's Avatar
neiasden
Thread Starter
|
Amateur
Joined: Oct 2012
Posts: 42
Likes: 0
From: stillwater, ok
Default

thanks for the reply,, im not sure, it just squeaks when im on a little bumpy roads, drives me nuts, but when i roll the window down, and pull the door in tight it stops making me think something is lose...
 
Reply
Old Nov 30, 2012 | 11:32 AM
  #4  
kejobe's Avatar
kejobe
Record Breaker
Joined: Aug 2010
Posts: 2,241
Likes: 12
From: Ohio
Default

Try moving the stricker (the part on the jamb not the latch) in (towards the inside of cab) about 1/8th of an inch. See if that helps.
 
Reply




All times are GMT -4. The time now is 04:37 AM.