When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
you can buy larger lugnuts with the same size thread so that is not a problem, you can go to any local auto store, bring both lugnuts and say what you need. iirc all third gens are 5 on 5.5 just like the 2nd gens so they will fit the pattern. as for tires, it won't be hard to find them, but they are pretty expensive...
so they will for a fact fit on my truck! i just dont want to get screwed. will i be able to find a 31inch tire to fit on them you think? spaz_22 you have been great help thanks for all of it!
they will fit your truck, but you may need to buy new lug nuts..i doubt it but it is a possibility...just check out any online tire website or go into a local store. i found some 285/60r18's...11.22inches wide, by 31.36 is the clossest to 31 you'll get. But like i said they can get pretty pricey depending on the tire design you want...but you want some mts you'll have to go with a larger tire....you can get some bfg at's 285/65r18's that are a little over 32 inches for almost 250 dollars...go to this site and play around with the aspect ratios..the first number is width of the tire in mm, the second is the aspect ration (height of sidewall by percentage of the width)..http://1010tires.com/TireSizeCalculator.asp