2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

no head lights

Thread Tools
 
Search this Thread
 
Old Apr 30, 2007 | 09:52 PM
  #1  
armark's Avatar
armark
Thread Starter
Joined: Apr 2007
Posts: 6
Likes: 0
Default no head lights

My 2001 dodge ram quad cab with a 5.2l. I have day time running lights, I have highbeams but no headlights. I cant find the relay if it has one.I checked the switch no burnt wires.
 
Reply
Old May 1, 2007 | 12:54 AM
  #2  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default RE: no head lights

just went and looked at my 01. there are fuses in the end of the dash and also under the hood, in the power dist. box beside the battery. there are relays in there, but only for the quad light setup (sport ?). mine had no relays but several fuses. check presence of 12 volt power coming to (and through) all those fuses, and also to and through the headlight switch. the switch itself is known for burning out.
 
Reply
Old May 1, 2007 | 02:11 AM
  #3  
armark's Avatar
armark
Thread Starter
Joined: Apr 2007
Posts: 6
Likes: 0
Default RE: no head lights

I did some digging.The problem was a broken wire clip in the wire harness at the highbeam switch. Thanks for your help.
 
Reply
Old Sep 6, 2007 | 12:37 PM
  #4  
armark's Avatar
armark
Thread Starter
Joined: Apr 2007
Posts: 6
Likes: 0
Default RE: Steering stops

I have a 2001 quad cab 2 wd and the tires on it are oversized. Can I buy after market steering stops. My tires currently rubbing on the lower cotrol arm when the tires are turned to sharp.
 
Reply
Old Sep 6, 2007 | 10:46 PM
  #5  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default RE: Steering stops

you should already have factory stops that are adjustable.
see here. https://dodgeforum.com/m_651617/tm.htm
 
Reply




All times are GMT -4. The time now is 12:49 AM.