2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

fault codes on a obd 1 engine

Thread Tools
 
Search this Thread
 
Old May 1, 2007 | 04:41 AM
  #1  
94ram15004x4's Avatar
94ram15004x4
Thread Starter
Joined: Mar 2007
Posts: 18
Likes: 0
From:
Default fault codes on a obd 1 engine

I have had 2 fault codes that are always active and have been in the truck as long as i have had it. I was wondering if anyone else has this? Should I worry abotu them? The codes are 12 (bat dissconect within the last 50 key offs) and 37 ( trans temp to high, trans temp voltage shorted, tcc lock up circuit mailfuction( i dont rember the tcc one correctly)).

has anyone dealt with these? my manual doesnt have any trouble shooting steps for them. thanks for the help.
ryan.
 
Reply
Old May 1, 2007 | 10:33 PM
  #2  
TMS Bill's Avatar
TMS Bill
Record Breaker
Joined: Jul 2006
Posts: 2,400
Likes: 1
From: Warren, NJ
Default RE: fault codes on a obd 1 engine

The 12 is normal ... the 37 is not. Here's a lot of information on OBD I vehicles. Might even find a fix for yours. http://ezinearticles.com/?OBD1-Codes...&id=188014
 
Reply
Old May 2, 2007 | 03:22 AM
  #3  
master tech's Avatar
master tech
Site Moderator & Tech
15 Year Member
Joined: Apr 2007
Posts: 11,642
Likes: 108
From: Near Sacramento,ca
Default RE: fault codes on a obd 1 engine

Yes I have, ck the connection at the transmission. If its okay then replace the lock-up solenoid. Need to remove the valve body to replace.
 
Reply
Old May 2, 2007 | 04:50 AM
  #4  
94ram15004x4's Avatar
94ram15004x4
Thread Starter
Joined: Mar 2007
Posts: 18
Likes: 0
From:
Default RE: fault codes on a obd 1 engine

the converter locks up and unlocks when im driving. It seems normal also. I might give it a shot and switch out the switch. Thanks for the help
 
Reply




All times are GMT -4. The time now is 05:16 PM.