Rough Idle and Misfire with upgraded cam
#11
06-01-2007 | 07:22 PM
Joined: May 2004
Posts: 3,811
Likes: 3
From: Bett-neee
#12
06-01-2007 | 07:30 PM
Legend
Joined: May 2005
Posts: 8,648
Likes: 6
RE: Rough Idle and Misfire with upgraded cam
ORIGINAL: shott8283
true.. if you send your computer to a company called B&G with a list of all your mods.. your pcm will come back programed to run them mods at the upmost effeciency. less some bullsh*t called tourqe managment.
true.. if you send your computer to a company called B&G with a list of all your mods.. your pcm will come back programed to run them mods at the upmost effeciency. less some bullsh*t called tourqe managment.
#13
06-01-2007 | 08:48 PM
Thread Starter
Joined: Sep 2006
Posts: 20
Likes: 0
RE: Rough Idle and Misfire with upgraded cam
Ahh Yes, B&G is who I was refering too.
KRC also used B&G to my knowlege.
They calibrate to your cam, adjust fuel curves, adjust timming, etc.
It's like 500$ but worth every penny if you have custom mods like cam or M1.
only minor downside is premium gas if you run hard.
KRC also used B&G to my knowlege.
They calibrate to your cam, adjust fuel curves, adjust timming, etc.
It's like 500$ but worth every penny if you have custom mods like cam or M1.
only minor downside is premium gas if you run hard.
