2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

loss of power

Thread Tools
 
Search this Thread
 
Old Jul 15, 2007 | 05:48 PM
  #1  
Fuhrmee's Avatar
Fuhrmee
Thread Starter
Joined: Jul 2007
Posts: 2
Likes: 0
Default loss of power

i have a 2001 3\4 ton dodge diesel 24 valve cummins. coming home from work in about a 8 mile distance my truck lost power 4 times. there was no acceleration when i put the pedal to the floor,it only lasted for about 5 to 10 seconds at the most.the truck now has a 0216 code, does that mean the injector pump is already bad or could i just replace the lift pump?
 
Reply
Old Jul 15, 2007 | 08:00 PM
  #2  
2001dodgeram1500's Avatar
2001dodgeram1500
Professional
Joined: May 2007
Posts: 230
Likes: 0
From:
Default RE: loss of power

[align=left]P0216 (M) Fuel Injection Pump Timing Failure High fuel supply restriction, low fuel pressure or possible[/align][align=left]wrong or incorrectly installed pump keyway.[/align][align=left]ummm.. i am not a mechanic and i cant seem to fix my truck but, try to check your fuel pressure.[/align][align=left]sounds like it's so restricted you aren't getting enough fuel.[/align][align=left][/align][align=left][/align][align=left]
P0230 Transfer Pump (Lift Pump) Circuit (this code is for the lift pump)
Out of Range
Problem detected in fuel transfer pump circuits.
[/align]
 
Reply
Old Jan 25, 2008 | 10:03 AM
  #3  
jconaway's Avatar
jconaway
Rookie
Joined: Apr 2007
Posts: 65
Likes: 2
Default RE: loss of power

I hate to tell you this, but it's my understanding that a P0216 code is considered a "death code" on these trucks.
I can cry with you; I think my injector pump died yesterday on my way to work. I don't have a way to pull codes, but my fuel pressure dropped to 0 and she quit. Put a new fuel pump on it and bled the system but I have no fire at all. This wasn't in my current budget plans...
 
Reply




All times are GMT -4. The time now is 12:25 PM.