how much HP do you think this kit should add to my 97' 5.9L dodge ram

http://www.jegs.com/webapp/wcs/store...61992_-1_11273

thanks,
Fred

 

You need to run a carb with that and will no longer be fuel injected.

 

You will get a whopping (hold on to your hats) 0 hp..that will not work , you have a FI truck this is what you need..
1. cam that is PCM friendy
2. B&G flash for the PCM to handle the bigger cam
3. Fastman TB
OTHERS WILL CHIME IN WITH THERE OPTIONS ON WHAT TO DO..

 

the intake will not bolt on because it is not for magnum heads. but if you wanna put a carb on you can, i just wouldnt recommend it. fuel injection has a much flater torque curve. i just depends on what your purpose for this tuck is.

 

Dangit you folks beat me to it...

 

it will add prolly 30 horse, assuming your willing to give up and modify all the electronics to adapt to a carb setup, and change the manifold to one that fits the magnum heads. I may be wrong butI believe I read someplace that the pre magnum and magnum cams are interchangable. (my number comes from the understanding that swaping to a carb from fuel injection on a crate 360 adds aprox that much.)

 

dont do it

 

+1