FIPK No More Picture Tutorial Step By Step: Breather UPDATE!
#11
#12
#13
#15
#16
RE: FIPK No More Picture Tutorial Step By Step Photo Instructions Here!
Thank you very much steve....make sure to check out my updates....
Cereal- I used the throttle body spacers to clear the throttle line and a vacuum line because my element was dipdish and not flat...Also, i dont suggest going bigger than 1/2 " or your going to have trouble with your S-Bolt going in...I tried [:'(]
Cereal- I used the throttle body spacers to clear the throttle line and a vacuum line because my element was dipdish and not flat...Also, i dont suggest going bigger than 1/2 " or your going to have trouble with your S-Bolt going in...I tried [:'(]
#19
RE: FIPK No More Picture Tutorial Step By Step: Breather UPDATE!
I hate to be a party pooper - but this has all been covered before....
This post is complete with part #s for everything you need to do it without a tb spacer and with a breather that fits in the grommet:
https://dodgeforum.com/fb.asp?m=732669
About 20 pages of info on the thread this post came from......
This post is complete with part #s for everything you need to do it without a tb spacer and with a breather that fits in the grommet:
https://dodgeforum.com/fb.asp?m=732669
About 20 pages of info on the thread this post came from......