air cleaner...
#1
air cleaner...
ok guys and dolls,
this is what I did for the air cleaner, I have wondered how everyone thats done this has gotton the carb stud installed when the stud screw hole is about an inch off center?
so this is what I did...we will see how this works...any ideas and or comments?
[IMG]local://upfiles/70129/FA7FA634A4234DDD9762D74E013E3AEA.jpg[/IMG]
[IMG]local://upfiles/70129/E00A949C8CBA4C90ABB8568D404A9CEE.jpg[/IMG]
[IMG]local://upfiles/70129/105B81950EBE4B65A0E138E556B9DD26.jpg[/IMG]
this is what I did for the air cleaner, I have wondered how everyone thats done this has gotton the carb stud installed when the stud screw hole is about an inch off center?
so this is what I did...we will see how this works...any ideas and or comments?
[IMG]local://upfiles/70129/FA7FA634A4234DDD9762D74E013E3AEA.jpg[/IMG]
[IMG]local://upfiles/70129/E00A949C8CBA4C90ABB8568D404A9CEE.jpg[/IMG]
[IMG]local://upfiles/70129/105B81950EBE4B65A0E138E556B9DD26.jpg[/IMG]
#2
#7
Trending Topics
#8
#9
RE: air cleaner...
I did cut down the size of the stud to match the top of the hat...I placed 2 inch body pucks everywhere...as in size...14 inch air cleaner or taller filter?
this is still experimental...I found it odd that there was a stud hole in the throttle boddy, there must be an aftermarket design for this? as for the heat issue, has anyone come across that yet?
this is still experimental...I found it odd that there was a stud hole in the throttle boddy, there must be an aftermarket design for this? as for the heat issue, has anyone come across that yet?