WANTED: 5.2 MAGNUM Bare block
Thread Starter
|
Registered User
Joined: Nov 2005
Posts: 28
Likes: 0
From:
WANTED: 5.2 MAGNUM Bare block
After a 5.2 Magnum bare virgin block to build my 390 stocker while my trucks still on the road. (May take a 5.9 block if its easier)
Now here's the fun part....I'm in Melbourne, Australia! Cant find 1 out here at all...PLEASE HELP!!
My trucks a '95 1500 RAM with a 46RH trans
Any help would be greatly apprieciated!
Simon
Now here's the fun part....I'm in Melbourne, Australia! Cant find 1 out here at all...PLEASE HELP!!
My trucks a '95 1500 RAM with a 46RH trans
Any help would be greatly apprieciated!
Simon
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
ORIGINAL: downunder_dodge
Common guys someone must have 1 or know of 1 floating around.
Desperately need 1 to do it over Xmas
Common guys someone must have 1 or know of 1 floating around.
Desperately need 1 to do it over Xmas
Veteran
Joined: Jun 2006
Posts: 303
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
I have a complete engine that just had bad compression. I dont know if it would work if u stripped averything off it. but im looking for $500 to let it go. only has 98k on the motor
Thread Starter
|
Registered User
Joined: Nov 2005
Posts: 28
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Veteran
Joined: Jun 2006
Posts: 303
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
ORIGINAL: downunder_dodge
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Thread Starter
|
Registered User
Joined: Nov 2005
Posts: 28
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
Yer thats wat i was scared of 
I'll think it over mate and let u know. Thanks heaps for all ur help. Greatly apprieciated!!
Dam living in this country lol.
I'll think it over mate and let u know. Thanks heaps for all ur help. Greatly apprieciated!!Dam living in this country lol.
Trending Topics
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
ORIGINAL: mikerados21
Well it came out of a 1998 dodge ram 1500 5.2 2WD Single Cab Truck so im pretty sure it will work. As far as price about $400-600 for freight on ocean. 27 days wait [&:]but ur looking at a price range of $900 AT THE LEAST to $1150 at the MOST!
ORIGINAL: downunder_dodge
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
All Star
Joined: Mar 2007
Posts: 890
Likes: 0
From: South Carolina
RE: WANTED: 5.2 MAGNUM Bare block
ORIGINAL: IndyRamMan
how much does it weigh? you may be able to ship it greyhound for like $100. Iv used greyhound (yes the bus company) to ship things that were very oversized/weight that would have cost a thousand or more $ to ship with a traditional company.
ORIGINAL: mikerados21
Well it came out of a 1998 dodge ram 1500 5.2 2WD Single Cab Truck so im pretty sure it will work. As far as price about $400-600 for freight on ocean. 27 days wait [&:]but ur looking at a price range of $900 AT THE LEAST to $1150 at the MOST!
ORIGINAL: downunder_dodge
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: WANTED: 5.2 MAGNUM Bare block
ORIGINAL: ICEMAN_CH
Do they have a bus that crosses the ocea?
ORIGINAL: IndyRamMan
how much does it weigh? you may be able to ship it greyhound for like $100. Iv used greyhound (yes the bus company) to ship things that were very oversized/weight that would have cost a thousand or more $ to ship with a traditional company.
ORIGINAL: mikerados21
Well it came out of a 1998 dodge ram 1500 5.2 2WD Single Cab Truck so im pretty sure it will work. As far as price about $400-600 for freight on ocean. 27 days wait [&:]but ur looking at a price range of $900 AT THE LEAST to $1150 at the MOST!
ORIGINAL: downunder_dodge
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?
Thanks mate. Thats not a bad price just the only thing is the price to get it over here. Would be good to have a complete 1 to reco then it would just be a weekend swap.
Would ya know wat its worth to get it sent out? I wouldnt know where to start as far as shipping goes..
Could i use a Pre Magnum 318 block?