DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Oil Light issue

   
Old Jan 10, 2008 | 07:55 PM
Share
  #11  
TheForce55555's Avatar
TheForce55555
All Star
Joined: Apr 2007
Posts: 958
Likes: 0
From: Southwest, Pa
Default RE: Oil Light issue
they should, but they should drag a little, just pray your crank is alright if not put new bearings in and run it till it dies, it will last a long time even if the crank is a little scratched
 
Reply
0
Old Jan 10, 2008 | 09:44 PM
Share
  #12  
low91rex's Avatar
low91rex
Thread Starter
Joined: Jan 2008
Posts: 8
Likes: 0
From:
Default RE: Oil Light issue
Cool thanks for all your input
 
Reply
0
Old Jan 10, 2008 | 10:10 PM
Share
  #13  
TheForce55555's Avatar
TheForce55555
All Star
Joined: Apr 2007
Posts: 958
Likes: 0
From: Southwest, Pa
Default RE: Oil Light issue
Also put some engine assembly lube on bearings before INSTALLING them. VERY IMPORTANT. DO NOT USE REGULAR GREASE only ENGINE ASSEMBLY LUBE.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
MSD 6AL in a 1996 5.2?


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 06:56 PM.