Good 5.9 build up article.
#12
02-21-2008 | 10:35 PM
Professional
Joined: Nov 2007
Posts: 152
Likes: 0
From:
#14
02-22-2008 | 06:54 AM
Champion
Joined: Aug 2005
Posts: 3,313
Likes: 8
RE: Good 5.9 build up article.
Dulcich's 408 from a 1972 LA evaluation:
http://www.carcraft.com/techarticles...ker/index.html
archived Magnum 318 build up to 400 shaft HP
http://web.archive.org/web/200605141...318/index.html
Mopar Perf RT Magnum cylinder heads flow tests and porting:
http://www.popularhotrodding.com/eng...ads/index.html
Edelbrock Magnum, plus Magnum engine differences:
http://www.popularhotrodding.com/tec...ecs/index.html
http://www.carcraft.com/techarticles...ker/index.html
archived Magnum 318 build up to 400 shaft HP
http://web.archive.org/web/200605141...318/index.html
Mopar Perf RT Magnum cylinder heads flow tests and porting:
http://www.popularhotrodding.com/eng...ads/index.html
Edelbrock Magnum, plus Magnum engine differences:
http://www.popularhotrodding.com/tec...ecs/index.html
#15
02-22-2008 | 05:19 PM
Record Breaker
Joined: Nov 2005
Posts: 1,827
Likes: 2
From: Ontario Canada
RE: Good 5.9 build up article.
ORIGINAL: IndyRamMan
bet your buddys truck sounds nasty with those solid lifters. You guys have a little arms race up there dontcha?
ORIGINAL: RM_Indy
Yeah if thats rwhp thats damn good #s with that small a cam. Curious on torque as well. Like to read that article, have to search their site.
I have abit bigger236/242 580/577L 114blower cam (low overlap)in my 8.5cr 408 with Eddy hds flowing 294/248cfm, m1/2bbl, 65lb inj, fast, 3800stall, should lay down 370rw with any luck na. Projectlow 12s na, much faster with boost.
My buddies NA 408 Indy (solid lifter, 248/254 615/625L on 110) w/58x55tb, m1/4bbl, 44lb inj, fast, 4000stallput that down(448rw) lastfall ona Mustangdyno wearing 20s. With open tb, it made 459rw. He wants to spray a 250 shot but needs the same fuel system I have to do it.
Think he may be the first(edit/Ram) to run a 11second et with NA 408 if he gets good air.
Yeah if thats rwhp thats damn good #s with that small a cam. Curious on torque as well. Like to read that article, have to search their site.
I have abit bigger236/242 580/577L 114blower cam (low overlap)in my 8.5cr 408 with Eddy hds flowing 294/248cfm, m1/2bbl, 65lb inj, fast, 3800stall, should lay down 370rw with any luck na. Projectlow 12s na, much faster with boost.
My buddies NA 408 Indy (solid lifter, 248/254 615/625L on 110) w/58x55tb, m1/4bbl, 44lb inj, fast, 4000stallput that down(448rw) lastfall ona Mustangdyno wearing 20s. With open tb, it made 459rw. He wants to spray a 250 shot but needs the same fuel system I have to do it.
Think he may be the first(edit/Ram) to run a 11second et with NA 408 if he gets good air.
