Just bought a halo headlight kit for my 96 Ram. When I hooked up the lights and turned the lights on, the high beam light on my dash stays on constantly, low or high beam on. Though a used kit, the wiring was from the factory. All I had to do was plug them in. What's the problem?

 

Take the plug on the halos and you have to switch the pins in the plug to match the wires on the plug from teh truck..On mine i had to switch the blue and black wires around on both plugs.

 

yea i figured that out yesterday i broke out my test light and ound that out, i didn't switch the pins i cut the one of the two black wires going into the middle pin and ran it to a ground on the body and it work perfect.

 

Thanks for the post!! I searched and in 1 hr I found the solution and fixed it!! Thanks guys!