Need help
#1
Need help
Since forum won't let me type much for some reason, I have to make this short. Transmission is still doing skip into overdrive. Truck is cutting out at WOT around 90mph. Truck also won't shift out of 2nd gear at WOT unless you let off. In overdrive, pedal is abnormally sensitive, and makes you pump the gas pedal everytime you hit a bump and it's driving me insane. What can I do guys???
#3
RE: Need help
Yes did you get the build sheet? I'd take that thing back. It should for sure not be doing that. I'd keep on them until it's all fixed. They clearly tried to cover up the problems instead of actually fixing them and it caused more problems. I think you need to post the build sheet though.
#4
RE: Need help
We need a build sheet dude. Otherwise all we can do is say "go yell at your tranny guys".
I was afraid they'd make it worse when you took it in. Now, when you bring it back to them again, they're going to claim that they just can't please you and that you'll never be satisfied, to cover up their shotty work.
Take it back and have them test drive it again (with you in the passenger seat). Tell them its not a loss of performance that you're talking about, its really messed up, especially with that 2nd gear thing.
Good luck.
EDIT: On the bright side of things, it appears that I can post more than two sentences at a time now.
I was afraid they'd make it worse when you took it in. Now, when you bring it back to them again, they're going to claim that they just can't please you and that you'll never be satisfied, to cover up their shotty work.
Take it back and have them test drive it again (with you in the passenger seat). Tell them its not a loss of performance that you're talking about, its really messed up, especially with that 2nd gear thing.
Good luck.
EDIT: On the bright side of things, it appears that I can post more than two sentences at a time now.
#6
RE: Need help
C’mon man, you keep starting new threads asking the same question, so don’t get upset if you keep getting the same answers…
1.) You really need to post a build sheet. You really need to do this for anyone to help you out otherwise all we can really tell you is…
2.) Keep taking it back to the shop until they get it right, which they may likely never do because you never listened to step 3, and this is really the most important…
1.) You really need to post a build sheet. You really need to do this for anyone to help you out otherwise all we can really tell you is…
2.) Keep taking it back to the shop until they get it right, which they may likely never do because you never listened to step 3, and this is really the most important…
#7
Trending Topics
#8
#10
RE: alternator
It's very frustrating. I asked the guy straight on for a build sheet, and I never received one. Could a torque converter, that is too strong for the truck, be causing the skip into overdrive. Also, my pedal in overdrive is so god damn sensitive, every bump makes me pump the gas pedal, it's probably the most annoying thing about this transmission.