2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

help needed

Thread Tools
 
Search this Thread
 
Old Aug 30, 2008 | 11:46 PM
  #1  
MDDODGE's Avatar
MDDODGE
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Default help needed

I got a 1999 dodge ram 4x4, 5.9l(gas), automatic. i got the codes P0505 and P0306. With the code P0505 i replaced the Iac motor and the code still pops up. As for the P0306 i swaped sparkplugs, cap and rotor. It still pops up. The MIL light been on for awhile. Any suggustions?
 
Reply
Old Aug 30, 2008 | 11:59 PM
  #2  
Trey318's Avatar
Trey318
Captain
Joined: Apr 2008
Posts: 723
Likes: 0
From: Galveston, Texas
Default

http://www.obd-codes.com/p0306
http://www.jeepforum.com/forum/showthread.php?t=219895

Hope those help.
 
Reply
Old Aug 31, 2008 | 12:06 AM
  #3  
Visious 318's Avatar
Visious 318
Professional
Joined: Jul 2008
Posts: 149
Likes: 0
From: LaPlata
Default

What compression does #6 cylander (dry and wet test) have and are you sure #6 is geting fuel from the injector? This info. will let one know if you have a bumb injector or a cylander with a bad valve, piston, lobes worn off cam, ect
 
Reply
Old Aug 31, 2008 | 12:11 AM
  #4  
MDDODGE's Avatar
MDDODGE
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Default

its dark here. will i hope its not bad to where i have to tear the motor apart.
 
Reply




All times are GMT -4. The time now is 09:37 PM.