2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

problems with transfer case

Thread Tools
 
Search this Thread
 
Old Sep 10, 2008 | 08:42 PM
  #1  
99DRAM31887's Avatar
99DRAM31887
Thread Starter
|
Veteran
Joined: Sep 2008
Posts: 336
Likes: 0
From: San Angelo,Texas
Default problems with transfer case

hey everyone iam new here and i will be going to the new users section to post another thread but on this one i have just bought a 99 single cab 1500 4x4 with the 5.2 and i tried out my 4x4 today and it makes like a knocking noise when ever i give it a lil gas it doesnt make noise putting it into 4hi but when i start going and give it gas is when it makes that i plan on fixin it i just wanted to see if yall might have had the same problem... thanks
 
Reply
Old Sep 10, 2008 | 10:47 PM
  #2  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

check the front drive shaft, its got that complicated double u-joint thing. there should be no play in any of the joints.

if its not obvious where the noise is coming fro, try to put it up on 4 jack stands and engage 4wd and safely inspect it while its turning.
 
Reply
Old Sep 11, 2008 | 10:03 AM
  #3  
Aubrey's Avatar
Aubrey
Record Breaker
Joined: Dec 2006
Posts: 1,366
Likes: 1
From: Englewood, CO
Default

Are you on pavement? Are you turning the wheel at all? What about in 4L? Does it happen reverse as well?
 
Reply
Old Sep 11, 2008 | 08:04 PM
  #4  
99DRAM31887's Avatar
99DRAM31887
Thread Starter
|
Veteran
Joined: Sep 2008
Posts: 336
Likes: 0
From: San Angelo,Texas
Default

yea iam on pavement... and i havent tried 4L and yea in reverse as well and while iam askin anyone know how to fix no reverse lights lol i have checked all fuses and replaced the bulbs but still nothing ......
 
Reply
Old Sep 11, 2008 | 10:12 PM
  #5  
99DRAM31887's Avatar
99DRAM31887
Thread Starter
|
Veteran
Joined: Sep 2008
Posts: 336
Likes: 0
From: San Angelo,Texas
Default

i tired it out in 4L but it will not let me engaged it unless it trucks off and not moving this is diff compared to my 99 durangos transfer case i had to be rolling at 5 mph to switch it but i can only engaged this one while the trucks still and when its in 4L it will hardly move and i cant disengage it or put the truck in park till i turn it off first if i try it grinds like nasty
 
Reply




All times are GMT -4. The time now is 10:47 AM.