CB Install Image
#91
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I while back, I installed a Uniden pc68ltw. I have dual 4ft-er's mounted on the barck rack. I like the look a lot but I'm not sure if I'm getting the best reception out of it. These are pics are from a while back...its set up a bit different now and I have a newer Cobra mic for it.
![Name: IMG_0742.jpg
Views: 111
Size: 40.5 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/108707d1501421133-cb-install-image-img_0742.jpg)
![Name: IMG_0742.jpg
Views: 111
Size: 40.5 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/108707d1501421133-cb-install-image-img_0742.jpg)
![Name: IMG_0667.jpg
Views: 118
Size: 39.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/108708d1501421133-cb-install-image-img_0667.jpg)
#93
#94
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
Received 2 Likes
on
1 Post
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Pa the law say 2 360 in blue. Thats all I got my 4 strobe whelen edge 2 star mini phantom and 1 whelen slim miser. All of the dash light are face front. Alot of ppl like the set up. The minis are well worth the money! And we dont have permits. There a sheet that goes around and we get card saying we can install/use them.
#95
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I like that alot bettter. We could do the same with red, but I just didnt have the money for the light bar. I aquired much of what I have for little to no cost. Recently, we have had multiple EVOC classes and they are stressing the importance of safe POV responses, so we are all up to date on our permits and what not.
#99
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I got real ambitious last friday night and moved my radio. You can see about where it used to be...I didn't wanna spend the $40 on a pre-made bracket so I made mine out of the ply-wood my old man had in the basement.
I loosened the front 2 mounting bolts for the middle seat and put a piece of light angle iron in it...and the rest is pretty self explainitory...
![Name: IMG_0766.jpg
Views: 100
Size: 84.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106819d1501417115-cb-install-image-img_0766.jpg)
![Name: IMG_0768.jpg
Views: 111
Size: 82.4 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106820d1501417115-cb-install-image-img_0768.jpg)
![Name: IMG_0770.jpg
Views: 132
Size: 101.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106821d1501417115-cb-install-image-img_0770.jpg)
![Name: IMG_0773.jpg
Views: 107
Size: 87.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106822d1501417115-cb-install-image-img_0773.jpg)
![Name: IMG_0775.jpg
Views: 124
Size: 83.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106823d1501417115-cb-install-image-img_0775.jpg)
I loosened the front 2 mounting bolts for the middle seat and put a piece of light angle iron in it...and the rest is pretty self explainitory...
![Name: IMG_0766.jpg
Views: 100
Size: 84.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106819d1501417115-cb-install-image-img_0766.jpg)
![Name: IMG_0768.jpg
Views: 111
Size: 82.4 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106820d1501417115-cb-install-image-img_0768.jpg)
![Name: IMG_0770.jpg
Views: 132
Size: 101.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106821d1501417115-cb-install-image-img_0770.jpg)
![Name: IMG_0773.jpg
Views: 107
Size: 87.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106822d1501417115-cb-install-image-img_0773.jpg)
![Name: IMG_0775.jpg
Views: 124
Size: 83.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106823d1501417115-cb-install-image-img_0775.jpg)
![Name: IMG_0771.jpg
Views: 123
Size: 127.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/106824d1501417115-cb-install-image-img_0771.jpg)
#100