When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Make sure your pipes go in separately. On mine, the 2 pipes come into a y before the cat and go single in/single out. If yours go in single like the one in the link, you should be okay. Just crawl under and take a look at her...
Agreed! And after doing some research you have to measure the size of the pipe(s) going into the cat. Even the Magnaflow website has many different options. But if you have 2 going in and not 2 going into 1 like stated above, then I think you want the 67, not the 37.
Yep if they go into the cat seperate you need that. If not and they go into a y before the cat then into the cat as one large pipe you need the 3" single in/single out with a reducer.
I'm thinking you will find out you need a different one then that. Like everybody else said usually the y pipe is a single pipe into the cat. I might be wrong but I think the one you listed is just a stock replacement. I don't think its a high flow
The pipe always looks like that. The oem is heavy gauge and nothing to worry about. However, either the ebay one has the wrong description or the Summit site is wrong. All I know is you don't want the one with a single in.