New Ram, headlight problem, w/ pics
#1
New Ram, headlight problem, w/ pics
Hello again all! Just picked up my new Ram today. It's an '01 Sport model. Everything is fine and dandy with it. As soon as I get it cleaned up I will get some pics up.
I do have one problem though that might get annoying after a bit. The right side headlight does not work. I bought a new bulb thinking it was that but when I popped off the connector to change it a bunch of brown and green dust came out. Knowing exactly what this was, I said "D'oh!" The connector was corroded inside and the bulb connections were as well. The filament in the bulb is just fine. I tried some contact cleaner/lubricant but still no go. Here are some pics of the connector so you can see what I'm talking about.
It also appears that one of the terminals is not making contact with the bulbs leads. What do you guys think I should do about this?
~Eric
I do have one problem though that might get annoying after a bit. The right side headlight does not work. I bought a new bulb thinking it was that but when I popped off the connector to change it a bunch of brown and green dust came out. Knowing exactly what this was, I said "D'oh!" The connector was corroded inside and the bulb connections were as well. The filament in the bulb is just fine. I tried some contact cleaner/lubricant but still no go. Here are some pics of the connector so you can see what I'm talking about.
It also appears that one of the terminals is not making contact with the bulbs leads. What do you guys think I should do about this?
~Eric
#2
#3
#4
Or just order one of the Nokya or similar headlight harnesses either solder on or pnp and cut the end off. You can get them on eBay for pretty cheap and they will stand up to high wattage bulbs if you ever run those. Advance near me also sells them although I'm not sure if they have them for 9004 bulbs or not. You can get the Nokya ones pretty cheap off eBay though and you could just solder it on.
#7
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
Received 2 Likes
on
1 Post
Trending Topics
#8
#9
I was actually thinking of takng the 4.2 head in with me to "makesure I get the right thing" and then taking the 4.0 one out with me saying I could not find the right one, but if I do that I can't keep the original if i dont like the 4.0 swap.