I searched the site...well under 2nd Gen forums and I was shocked I didn't already see a thread on Seaform...I swear this has been talked about before...weird.

Anyway I was wondering if someone can give me a quick How To? I plan on doing it tomorrow morning before work cause I want to drive it when I go to work.

I heard the following:
- Half bottle in tank and run until smoke is gone (highway okay?)
- Put 3 oz in oil just remember to change the oil once you run it for a little
- Put 3 oz in the PCV(?) Is the image below my PCV to put into?



Am I right? here is a video I see on it: http://www.youtube.com/watch?v=XYpm4zy_VI8

Thanks for any help given.

 

IMHO - In the Oil is not worth it. You want to clean the inside, if you stick with regular oil, swap a quart to Marvel Mystery Oil. Or, just go synthetic.


I've done mine through the brake booster. Half in the brake booster vacuum line, half in the gas tank(MMO can be used in fuel as well)


Put it in when the motor is warm, once in, turn it off for about 30 minutes. Start it up, watch it smoke, take it for a drive until it's done smoking. I usually drive it around for at least 30minutes+ to make sure it's good and gone. Not something you want left setting in the motor.


You may have to change the spark plugs afterwards. I was able to get by with two Seafoams before changing the plugs.



There're also a bunch of videos on YouTube.




.02

 

there are threads about seafoam!!!.. your searching skill are lacking!

 

yea it should be with in the last 2 pages!!

 

Well I did a search for "seaform" just one posting please teach me the ways of better searching and post some links cause I did not find much and I thought there was tons on it.

Thank you oh powerful searchers.

 

Just like OneBadKota said.

johnny.

 

Try searching for seafoam not seaform ,

 

+1...shebang! lol

 

i put it in the brake booster vac hose and bammmmm, smoke like crazy, and she clean and better milage and performance

 

Holy LOL!!!!