Would an add-a-leaf fit the leaf pack of an Off-Road edition. I know that the springs are different to account for the 2 inches of lift. I just bought the Rough Country Series II 5 in lift and am not to keen on the stacking blocks method that RC uses and am looking for alternatives. Thanks.

 

Should fit fine.

 

an add-a-leaf is just that... it adds a leaf. it doesnt matter what model you have, you can add a leaf to the bottom of the spring pack, and it will add whatever height that leaf is thick. youll just need longer u-bolts and centerpin

 

also, there is a diy writeup in the CTD forum if you need one. look at the DIY thread tacked at the top of the forum...

 

Sorry, alot of abbreviations here. Diy? CTD? I would like to see this write up but am not quite sure what you are saying here.

 

cummins turbo diesel... do it yourself

 

better yet...

https://dodgeforum.com/m_842685/tm.htm

 

thanks

 

i just got my 5 in RC lift put in a week ago. it has stacked blocks and i want to add a 4 inch skyjacker add a leaf ontop of that and 2 inch spacers in front.

Did you need a transfer case drop kit, or anything else?
I ask because i now have no 4wd and my tranny seems to be slipping or something

one more ? if i got the 3 inch blocks i think plus the RC 5 inch blocks will the add a leaf U bolts come long enough(assuming someone has done this)


down the road it will have 3 inch factory blocks,5 inch RC blocks, 4 inch AAL, 7 inch BDS shackel flip and will be leveled out in the front