im getting ready to paint my frame in a little bit and i was wondering what you guys would recommend for paint? would good ol' rustnolium work or something a higher on the quality pole be better?

 

"Rustnolium" (hehe) should work fine.

Those have got to be the littlest tires I've ever seen on a truck that high.

 

i've fully painted my frame 3 times,,,, and what worked the best was the "Rustolium" heavy duty rust primer then a few coats of the rustolium paint........... also a good wire brush on a drill and you sould be good

 

if you want to get the best results, i would go with POR-15 ar something similar to that....its chip resistant and takes little prep

 

as soon as the weather breaks,i am gonna get cans of spray on undercoating and do the whole underside of my truck. i mean not everything,but almost everything.

 

youd better do excellent with your prep, i got some of that for the inside of my ddors and after it was dry i can take my finger and scratch it off like nothin

 

i recently painted my frame and used rust primer and rockerguard. I don't know if its the texture your looking for but i like the way it came out. I also used a shutz gun to spary it.

I went from this...


to this...

 

is that the same texture as rhinoliner kinda? what did you have to do for prep?