When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a rattle sound when I first start off...either in forward or reverse. It sounds to be coming from under the truck...Please give me suggestions...I can't stand it.
i actually had a rattle too, come to find out when i did my plug wires, i routed them around my tranny dipstick tube and it was hitting my valve cover/intake. re-routed wires underneath the tube and its gone
Isn' t that going to loosen stuff up in there? SO if I hit it and it rattles..then what?
then you found your rattle
then you can deside if it's heat sheld or it's in side of the cat.
if it out side (heat sheld) weld or punch it
inside, new cat, gutt the cat, or y pipe
it very common on these ram truck to have a bad cat