2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Pics of the lvl kit? IDK

Thread Tools
 
Search this Thread
 
Old Apr 24, 2009 | 03:44 PM
  #1  
Steel Horse's Avatar
Steel Horse
Thread Starter
|
Professional
Joined: Apr 2009
Posts: 247
Likes: 0
From: Texas
Default Pics of the lvl kit? IDK

I bought a 2001 ram 5.9 4x4 . I know nothing about it. Ive been told i have a 2.5 lvl kit on it. Tire size are 265/75/16. Im wanting to put 35's on. Do i need a body lift? Ive been told that a body lift aint all that noticeable on it. what do you guys think? The truck below is the truck!!


Yall say i dont have a lvl kit. I was told by 4wheelparts i do. So what do yall think.

Thanks
 

Last edited by Steel Horse; May 11, 2009 at 01:02 PM.
Reply
Old Apr 24, 2009 | 04:18 PM
  #2  
dakotas ram's Avatar
dakotas ram
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
Default

im pretty sure that those blocks only came on offroad editions......maybe its got 2.5 in front and back....which still leaves the front lower
 
Reply
Old Apr 24, 2009 | 05:57 PM
  #3  
Steel Horse's Avatar
Steel Horse
Thread Starter
|
Professional
Joined: Apr 2009
Posts: 247
Likes: 0
From: Texas
Default

Well i just found out. I do have the offroad eddition. So any info yall can give me about this eddition?
 
Reply
Old Apr 24, 2009 | 09:38 PM
  #4  
dakotas ram's Avatar
dakotas ram
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
Default

how did you find that out......you dont have the wheels or decals it dont look like.....
 
Reply
Old Apr 24, 2009 | 10:12 PM
  #5  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

offroad edition has 4.10 rear gear, extra 2 inch lift on front and rear, and tow hooks on the front. check the sticker in the glove box, also sticker on rear axle tube - drivers side for the 4.10 sticker.

my 01 is standard, and has those 3 inch blocks under the rear springs.
 
Reply
Old Apr 24, 2009 | 11:39 PM
  #6  
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

Well the only thing that I can see it that it looks beat to $hit! Just go out and get a new 3-5" lift.
 
Reply
Old Apr 25, 2009 | 06:09 PM
  #7  
Steel Horse's Avatar
Steel Horse
Thread Starter
|
Professional
Joined: Apr 2009
Posts: 247
Likes: 0
From: Texas
Default

I called the dealer and they ran the vin number and told me it was the off road edition. I have 4:10 gears in the rear end.
 
Reply
Old Apr 25, 2009 | 08:01 PM
  #8  
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

And front.
 
Reply
Old Apr 25, 2009 | 08:57 PM
  #9  
Steel Horse's Avatar
Steel Horse
Thread Starter
|
Professional
Joined: Apr 2009
Posts: 247
Likes: 0
From: Texas
Default

i have no idea about the front. But they told me i have the Off road edition , 4:10 gears and i forget what tranny they told me i had. You can see the 3 inch block in the back under the lee springs
 
Reply
Old Apr 25, 2009 | 09:13 PM
  #10  
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

Trust me you have 4.10's front and rear if you didnt there wouldn't be any 4x4 in your truck anymore.
 
Reply



All times are GMT -4. The time now is 11:28 PM.