Tach in a non-tach dash
#1
#3
I can't help you, but, don't get discouraged, it's the weekend, and is a very slow time for the forum.
And btw, I have no tach either, and would love one. But I would personally not deal with the stock dash. I would get an aftermarket and put it in the pillar or mount it some where else.
And btw, I have no tach either, and would love one. But I would personally not deal with the stock dash. I would get an aftermarket and put it in the pillar or mount it some where else.
Last edited by zman17; 05-17-2009 at 12:33 PM.
#4
#6
that question's has been posed a number of times, but like a lot of questions, never actually gets answered. i can tell you that its not too hard to swap out, and its probably worth a try, provided you buy the cluster cheap enough. the prndl is an insertable module, but you'd probably be best off to try and get a match on year, auto/man, gas/diesel, MPH/KM. i bought a cluster on ebay for $25.
also be aware that the mileage is stored in the cluster, and cannot be changed (in the electronic 98+ models).
if it worked - you could probably move your existing speedo/odometer into the tach cluster.
edit. an ebay search indicates that 94-97 are interchangable.
http://cgi.ebay.com/ebaymotors/94-95...Q5fAccessories
also be aware that the mileage is stored in the cluster, and cannot be changed (in the electronic 98+ models).
if it worked - you could probably move your existing speedo/odometer into the tach cluster.
edit. an ebay search indicates that 94-97 are interchangable.
http://cgi.ebay.com/ebaymotors/94-95...Q5fAccessories
Last edited by dhvaughan; 05-17-2009 at 02:13 PM.
#7
Trending Topics
#8
Thanks for the info guys, I know up to 97 is the mechanical odometer and that the auto and manual dashes were slightly different, especially with a tach since you move two guages outward to accomodate the tach. But I did not know that the PRND21 was an insertable module. I was wondering if the truck has one master harness and you just plug and play. My 98 saturn is like that, to upgrade stereo, cruise etc. you just need the hardware and plug in to the existing wiring harness at the appropriate connector. I do know that my 97 ram has a wire in the engine compartment labeled PTO which I am assuming can be used if you have the 241HD t-case.
#9