abs brake light
#11
07-16-2009 | 04:28 PM
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
ok, I disconnected batt cable and turned ignition to clear the codes. Started her up and left it in parke and did not touch brake pedal and.... lights came on at the exact time they have been coming on. Seems to me this would rule out wheel and speed sensors, brake lines, calipers, warped routers, bad bearings. But I'm the first to admit, I'm no expert.
Last edited by zman17; 07-16-2009 at 04:31 PM.
#13
07-20-2009 | 10:51 AM
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
That obviously rules out front sensors. Did you look above the fuel tank real good for a leak? We're not talking about some huge leak, you might just see a very small wet spot. You might take a look at the brake light switch too. And you did check the fuses and relays right?
Last edited by zman17; 07-20-2009 at 10:53 AM.
