2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Radiator leaking

Old Jul 24, 2009 | 09:37 AM
  #1  
hilliad's Avatar
hilliad
Thread Starter
|
Professional
Joined: May 2006
Posts: 140
Likes: 2
From: Central NC
Default Radiator leaking

My radiator is leaking from the drivers side bottom. Thought is was the bottm hose but it is on passenger side. Do I need a new radiator?
 
Reply
Old Jul 24, 2009 | 01:55 PM
  #2  
helms's Avatar
helms
All Star
Joined: Jun 2007
Posts: 981
Likes: 0
From: Langley, BC, Canada
Default

well, it depends how bad the leak is. if its just seeping, then you might be able to get away with a sealer like barrs leak. but if its a gusher, then you will most likely need a rad.
 
Reply
Old Jul 24, 2009 | 02:09 PM
  #3  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Replace it. I don't recommend using any sealer. It will clog up the rest of the system eventually.
 
Reply
Old Jul 24, 2009 | 02:13 PM
  #4  
Sheriff420's Avatar
Sheriff420
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
Default

ou radiators have the plastic caps on the ends and can't be repaired like the old metal ones. if you want a cheap fix then you can try jb water weld. i've never used it but according to the package it should work pretty good. and don't use bars leaks.
 
Reply
Old Jul 24, 2009 | 05:35 PM
  #5  
wjxavier's Avatar
wjxavier
Record Breaker
Joined: Feb 2009
Posts: 1,140
Likes: 3
From: Fredericksburg, VA
Default

for the love of God, don't use any coolant sealer or anything like that. it WILL screw things up, eventually. its just not a good idea and i would only suggest using it in an emergency(i.e. on the road and no way to fix it). just replace the radiator if thats where its leaking from.
 
Reply
Old Jul 24, 2009 | 06:12 PM
  #6  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

I wouldn't suggest it even in an emergency, unless of course it was between cutting my leg off or bleeding to death.LOL
 
Reply
Old Jul 25, 2009 | 09:15 AM
  #7  
Sheriff420's Avatar
Sheriff420
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
Default

what do ya'll think of jb water weld? new radiators aren't cheap. i replaced mine a couple years ago because it was leaking where the metal meets the plastic on the lower front passenger side and if i could have stopped the leak by slapping some jb weld on it i would have. my leak was just a dribble though so pressure wouldn't have been an issue for me.
 
Reply
Old Jul 25, 2009 | 03:57 PM
  #8  
wjxavier's Avatar
wjxavier
Record Breaker
Joined: Feb 2009
Posts: 1,140
Likes: 3
From: Fredericksburg, VA
Default

if you put some sort of epoxy on the outside that won't eventually eat away at whatever it is you're epoxying, then yea, go for it. but dont put anything IN your system.
 
Reply
Old Jul 25, 2009 | 04:27 PM
  #9  
Sheriff420's Avatar
Sheriff420
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
Default

i'm pretty sure the water weld will hold up to coolant. i know there are a lot of stories about people using plain old jb weld to seal up engine parts so i'd give that a try because its cheap.
 
Reply
Old Jul 26, 2009 | 09:41 AM
  #10  
sungod's Avatar
sungod
Veteran
Joined: Jun 2008
Posts: 389
Likes: 1
From: Fairfax VA
Default

You can find good deals on radiators on ebay. It would probably be cheaper in the long run to replace than try to bandaid fix it.
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:06 PM.