DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

LED Taillights comments

Thread Tools
 
Search this Thread
 
  #51  
Old 08-01-2009 | 03:09 AM
Miami_Son's Avatar
Miami_Son
Thread Starter
|
Banned
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Default
According to the LMC catalog, they are not the same and have different part numbers. I'm just sayin'.
 
Reply Like
  #52  
Old 08-01-2009 | 03:16 AM
fukinavit's Avatar
fukinavit
Registered User
Joined: Nov 2008
Posts: 20
Likes: 0
From: Edmonton
Default
No problem, im just sure they will fit.
 
Reply Like
  #53  
Old 08-01-2009 | 03:19 AM
Laramie1997's Avatar
Laramie1997
Grand Champion
Joined: Sep 2008
Posts: 6,980
Likes: 4
From: Springfield MO
Default
Originally Posted by fukinavit
No problem, im just sure they will fit.
Not with out modification. You will be going from a quad bulb to a dual bulb setup. Two totally different plugs.
 
Reply Like
  #54  
Old 08-01-2009 | 03:25 AM
fukinavit's Avatar
fukinavit
Registered User
Joined: Nov 2008
Posts: 20
Likes: 0
From: Edmonton
Default
True, but thats easy. Physically they will be a straight swap.
 
Reply Like
  #55  
Old 08-01-2009 | 06:52 AM
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default
Originally Posted by Miami_Son
Sorry, it's those blue lights. I keep seeing you as an authority figure.
I am big fire man. lol. Now send me a few 100 bucks!
 
Reply Like
  #56  
Old 08-06-2009 | 07:16 PM
Miami_Son's Avatar
Miami_Son
Thread Starter
|
Banned
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Default
OK, got my LED taillights in yesterday. Pretty well built and fit perfectly. Spent all morning sanding and painting them to match the truck. Had to scrape off all the mold flashing first. Used the Rust-o-leum paint for plastic, but it dries with a low gloss so I had to clear coat them, as well, to match the truck.

Name: Taillight2.jpg Views: 16 Size: 81.1 KB
Name: Taillight3.jpg Views: 16 Size: 56.5 KB
My paint booth.
Name: Taillight1.jpg Views: 16 Size: 89.5 KB
Name: Taillight4.jpg Views: 16 Size: 83.8 KB
Name: Taillight5.jpg Views: 16 Size: 80.8 KB
Name: Taillight6.jpg Views: 16 Size: 43.6 KB
The old taillights.
Name: RAM015.jpg Views: 16 Size: 77.7 KB
New ones.
Name: Taillight7.jpg Views: 15 Size: 89.4 KB
Brakes on.
Name: Taillight8.jpg Views: 15 Size: 86.7 KB
While I was at it painting I decided to color match the tailgate handle.
Name: Tailgate1.jpg Views: 18 Size: 50.6 KB
I might go ahead and do the door handles, too. May even do the mirrors at some point. Looks so much cleaner.
 
Last edited by Miami_Son; 08-06-2009 at 07:21 PM.
Reply Like
  #57  
Old 08-06-2009 | 08:07 PM
hirschy's Avatar
hirschy
Veteran
Joined: Jul 2008
Posts: 299
Likes: 0
From: Winnipeg, Manitoba
Default
looks good Miami! Did it take long to sand and paint?
 
Reply Like
  #58  
Old 08-06-2009 | 08:25 PM
Miami_Son's Avatar
Miami_Son
Thread Starter
|
Banned
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Default
Did a little last night and masked the lenses, the bulk of the prep this morning. The lights came already primed in black, so after scraping down the parting lines and a little sanding with 1000 grit paper, they were ready to spray. Done, dry and ready to install by 1:30pm.
 
Reply Like
  #59  
Old 08-06-2009 | 08:33 PM
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default
Cuba and harley come agin!?
 
Reply Like
  #60  
Old 08-06-2009 | 08:40 PM
Miami_Son's Avatar
Miami_Son
Thread Starter
|
Banned
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Default
Joo got somtin' agin' da Cubans ridin' 'Arlees, mang?
 
Reply Like



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 11:59 PM.