DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

truck dies and trans problem

Thread Tools
 
Search this Thread
 
Old Aug 6, 2009 | 04:18 PM
Share
  #21  
ruquick77's Avatar
ruquick77
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 28
Likes: 0
Default
Originally Posted by zman17
I said unscrew not unplug.

Ok i unscrewed it and it still ran the same so while i had it out i just put a new one in. It runs a little better but still something wrong.
 
Reply
0
Old Aug 6, 2009 | 04:28 PM
Share
  #22  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default
Time to check the plenum to eliminate that as a prob. And replace the o2 with a new one. other than that, I won't be able to help for a few days a the very least. So hopefully my Df bros will have something to say.
 
Reply
0
Old Aug 6, 2009 | 04:48 PM
Share
  #23  
ruquick77's Avatar
ruquick77
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 28
Likes: 0
Default
Originally Posted by zman17
Time to check the plenum to eliminate that as a prob. And replace the o2 with a new one. other than that, I won't be able to help for a few days a the very least. So hopefully my Df bros will have something to say.
Thanks for the help Zman17,

I have already replaced the o2 with a new one today. I will look in to the plenum and see if that is the problem.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
round air cleaner




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 07:53 AM.