I moved my driver seat bottom to the pass side.You can't see the rip on the other..All you need is a 10mm wrench



Looks bad!




10mm bolt




Seat off Good time to clean carpet.



Looks good for 10min of work.

 

Good job. I pulled the seat cover off, turned it inside out, and sewed it up with 15lb test fishing line. I also reinforced the side where my fat *** slides across it, using some new stiff foam my wife got at hobby lobby. 22 Years in the Navy came in handy once again!

 

I have a 95 and I don't think the cushions can be swapped like that since the levers stick through the side of the seat. That was a good temp fix.

 

+1 your rite we 95 models cant switch out but we can take off the cover and for 35 bucks (well thats what i paid) get the whole side of the seat fixed and i looks brand new once put back on

 

Actually that lever has to come off somehow. Either it has a cap that shows a screw underneath or it needs a tool to release it. The way I look at things is, if that part wasn't born on there, there's gotta be a way to get it off. My 97 has the same design as your's and I'm sure that lever comes off.

 

Or, you can follow along the same lines, and just switch the foam across. It was covered on here not too long ago. Just switch the foam around, and you'll be happy.

 

Does anyone know if this will work with power heated leather seats?

My drivers seat bottom feels like im leaning to the left, and so far is the most annoying thing about the truck for me so far (6 months)

 

I need to do that. My upholstery isn't ripped, but the foam sure is wimpy on that edge.

 

seat covers work great for me..i washed em..threw em on..and ta da..did it in 5 minutes after they dried..

looks pretty good to..and mine was so bad that you could stick your whole had in there

 

my driver seat sags on the outter edge and has a tear...but is a 95....and i have a blue interior and cant find blue seats anywhere....

ill take a look into mine today and see what it requires to do the 95 seats