2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Control Timer Module (CTM) Issue?

Thread Tools
 
Search this Thread
 
Old Feb 21, 2013 | 12:27 PM
  #21  
dodgeman41291's Avatar
dodgeman41291
Amateur
Joined: Feb 2010
Posts: 26
Likes: 0
From: Watertown, TN
Default

ok, well I replaced the Time Delay Relay, and I still don't have any Map lights or Dome lights when the door opens, the only time I can get the dome or map lights to come on is by turning the **** on the headlight switch, I went through both fuse blocks and tested every fuse. and like i said previously the chime works when the key is in the ignition and the door is open, but no light.

also on the power block under the hood, I saw a fuse for fog lamps, but I don't have any fox lamps on my truck none the less a button for it.

anyways off topic. any more suggestions, the next thing im going to do is replace the door jam button.

if anyone has any other suggestions please let me know, this is agitating when I can see to get into my own truck at night.
 
Reply
Old Feb 21, 2013 | 01:06 PM
  #22  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

If I have the dash switch all the way off, interior lights do not come on. But if it is rolled up to about half way, the interior lights do come on when I open door. Don;t know if yours is set up that way or not. Check door switch.
 
Reply
Old Feb 23, 2013 | 01:31 AM
  #23  
dodgeman41291's Avatar
dodgeman41291
Amateur
Joined: Feb 2010
Posts: 26
Likes: 0
From: Watertown, TN
Default

Originally Posted by gdstock
If I have the dash switch all the way off, interior lights do not come on. But if it is rolled up to about half way, the interior lights do come on when I open door. Don;t know if yours is set up that way or not. Check door switch.
The door switch is fine becuase the chime works when the key is in the ignition. or when the headlights are left on and the door is open.

as well as seat belt alert and so on.

I am going to try and replace the headlight switch.
 
Reply
Old Feb 23, 2013 | 10:30 AM
  #24  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,468
Likes: 4,220
From: Clayton MI
Default

Three wires at the drivers door switch.... check 'em all.
 
Reply
Old Feb 24, 2013 | 12:13 AM
  #25  
dodgeman41291's Avatar
dodgeman41291
Amateur
Joined: Feb 2010
Posts: 26
Likes: 0
From: Watertown, TN
Default

Originally Posted by HeyYou
Three wires at the drivers door switch.... check 'em all.
what ill end up doing is replacing the door electronics pins and the headlight switch as well.
 
Reply
Old Feb 24, 2013 | 12:26 AM
  #26  
dodgeman41291's Avatar
dodgeman41291
Amateur
Joined: Feb 2010
Posts: 26
Likes: 0
From: Watertown, TN
Default

Originally Posted by HeyYou
Three wires at the drivers door switch.... check 'em all.
can someone send a pic of the connector on the back of that door jamb switch?

thanks in advance
 
Reply
Old Feb 24, 2013 | 09:36 AM
  #27  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,468
Likes: 4,220
From: Clayton MI
Default

Three wires:

Black with Light Blue Trace: From Headlight switch. Has power when park or headlights are on.

Yellow: Should have 12 volts all the time.

Brown with Orange Trace: Goes to ground.
 
Reply




All times are GMT -4. The time now is 11:45 AM.