When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
to do this, you need 2, one of them, you cut the bottom off, so the o2 sensor can screw all the way in, then that will screw into the unmodded one which goes in the pipe
ok that makes more since now. i will just do that instead. any clue on wat size i need? i couldnt tell from just matching them up at AZ because i couldnt get the sensor to screw into the fouler
i am just starting out and i had put duel 3" pipe from the exhaust manifold with a flowmaster 40 series muffler on. i dont have a cat or an O2 sensor it is just zip tied to the frame do i need to install it back i am running about 13 mpg.
thanks
i am just starting out and i had put duel 3" pipe from the exhaust manifold with a flowmaster 40 series muffler on. i dont have a cat or an O2 sensor it is just zip tied to the frame do i need to install it back i am running about 13 mpg.
thanks
DUAL 3"?! thats insanely too big of a system.......as for the ziptie, yes thats fine for the rear sensor....13 mpg is decent for these trucks