When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Ok so today I decided to bleed the oil line. It did help some so now I have 0 at idle and at 1,200 rpm 20 psi and at 2,000 rpm 30 ish. If I quick rev it I get 60. So I guess for now it will be ok. Thanks every one who replyed. Steve
"So I guess for now it will be ok" I gonna leave you on the side of the road with a seized engine. Fix it once and fix it right.
Dang it Moparama, you did it to me again!!! You beat me to the punch!!! JK
I'd go ahead and replace that gauge and put the sending unit in the factory location on the engine. You can get good AutoMeter electric gauges for around $45.
12-09-2009 | 10:17 PM
