ABS Question
#11
#12
The abs sensors for the front go down to the wheel bearing hub, but if they were bad the abs and brake light would be solid, not flashing.
But in any case you can check the resistance of the front sensors...should be between 900-1000ish, (depending on the posistion of the tone ring and sensor.
the plugs are connected on top of the wheel wells.
Again I doubt this is the issue
I would think the tuner is confused and thinks you have a different ABS system, or something like the pressure differential valve is malfunctioning...(I can't remember the name of it)
I would first try to find what errors show a blinking ABS light to narrow it down.
or as a last resort unplug the battery for a while and see if it clears
But in any case you can check the resistance of the front sensors...should be between 900-1000ish, (depending on the posistion of the tone ring and sensor.
the plugs are connected on top of the wheel wells.
Again I doubt this is the issue
I would think the tuner is confused and thinks you have a different ABS system, or something like the pressure differential valve is malfunctioning...(I can't remember the name of it)
I would first try to find what errors show a blinking ABS light to narrow it down.
or as a last resort unplug the battery for a while and see if it clears
#14
#15
#16
#18
I don't know, but I thought the rear sensor would turn the ABS solid with the addition of the brake light.
I know for a fact the front does........Cause I just replaced my front pass side.
Anyone here who replaced the rear have it blink?