Is the 360 an interference engine?
#11
02-05-2010, 10:05 PM
Join Date: Jan 2010
Location: Massachusetts
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
i'm not following the story here - what the hell happened ?
did you replace the cam ?
or just the timing chain ?
the cam and crank are slotted for keys, and there's only two? ways it can go on, right? the right way and one wrong way, where the crank dot is up but the cam dot is also up (instead of down) ?
fess up. what happened ?
have you put everything right and rechecked for compression ? i can't believe all eight cylinders have zero compression. that doesn't seem right.
did you replace the cam ?
or just the timing chain ?
the cam and crank are slotted for keys, and there's only two? ways it can go on, right? the right way and one wrong way, where the crank dot is up but the cam dot is also up (instead of down) ?
fess up. what happened ?
have you put everything right and rechecked for compression ? i can't believe all eight cylinders have zero compression. that doesn't seem right.
.Dads going to start stripping out the stuff tommorrow; i have to work.
#12
02-07-2010, 11:53 PM
Join Date: Jan 2010
Location: Massachusetts
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts