When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
but it's more like gotta keep the poor people out I hate the thoughts of payin a bunch of money for the couple times a year I would go over into the states. But I'm gonna have to bite the bullet if I ever wanna go to another nascar race....
My fiance is from northern Manitoba originally, an due to Canada's dumb policy I can't go up north because I got a DUI over 6 years ago when I was young and dumb. Oh well, excuse to celebrate holidays at home!
You will notice a little lowend power loss from the 285's. If you ever plan on putting in a locker, save the extra money and do 4.10 gears while you're at it.
yeah i have 305/70/16 and stock gears, the power is ok but when i hook up to a loaded trailer...i can deff tell a big difference. but when i get the money im switching to either 4.10 or 4.56 i cant decide but i just wanna go up to a 35 or 36 with a lift and stock gears aint gonna cut it haha
I run 285/75/16's on 3.55 gears with no lift on a 1500 4x4 w/318. There is a slight loss of low end power, but unless you're towing something, it isn't really noticeable. For those who are thinking about 285/75/16's on stock ride height, the tires will rub at full turn.