Which 14x3 Air Cleaner do ya'll recommend, and what do you do with the Breather line once it's installed? I was planning on running a K&N filter on whatever air cleaner I get too.

sgg

 

https://dodgeforum.com/forum/2nd-gen...k-no-more.html

https://dodgeforum.com/forum/2nd-gen...r-filters.html

https://dodgeforum.com/forum/2nd-gen...r-cleaner.html


Read these. BTW, K&N is overpriced crap that filters like a hookers vagina, don't waste the $50 on it and just use the paper one.

 

+1^

And once again, all 14x3's are the same, they are just two pieces of stamped aluminum.

 

Actually...most are stamped and chromed steel and pretty much imported from places far away. Just sayin'...
As generic as they appear, the secret to gettting one to fit correctly is in the base. I believe the threads mentioned previously will cover some of those questions. Happy hunting!
I ran my breather tube over to an adapter that I installed on the base. Tight fit but it works and looks factory. At least factory enough to pass a visual inspection.